Products > Ancillaries > Permavent Tray

Product description

	• Durable and totally resistant to decay • Supplied in convenient 1.5m lengths • Light and easy to handle • Cost-effective • Quick and easy to install

USE:

• At the eaves of a roof to support and protect roofing felt
• For roof pitches of between 15 – 70 degrees
• For remedial work to replace worn or perished roofing felt
• Fit in new build or refurbishment situations
• Use to support the roofing felt at eaves level and to provide additional protection at this vulnerable point
• To provide free air movement to over fascia ventilation

FEATURES & BENEFITS

• Overcomes problems associated with using traditional bitumen based roofing felt
• Perishing & cracking at the point where the felt is dressed into the gutter
• Water collection between rafters and the rear of the fascia board
• Prevents felt from sagging at eaves level and subsequent ponding of water
• Eliminates the need to strip large section of roof to replace old damaged felt
• Allows the felt to be cut back level with the rear of the fascia board
• Improves performance of other roofing materials

Permavent™ –Tray eaves protector has been designed and developed to resolve the problems associated with rotting and damaged roofing felt at the base of the rafters.

Manufactured in PVC-u, Permavent – Tray eaves protector will support the damaged roofing felt and deliver rainwater into the gutter system by means of angled lip designed to minimise the possibility of trapping leaves etc. in the gutter and thereby allowing the free flow of rainwater.

Should Permavent™ – Tray eaves protector need to be trimmed to suit a particular detail, a Stanley knife or toothed handsaw should be used. The 1500 mm length allows overlap joint to be supported on a rafter whatever the spacing.

Material	weathering grade rigid PVC – u
Length (mm)	1500
Width (mm)	300
Thickness (mm)	2